Highsider Motorcycle led tail light Rocket

LED rear light HIGHSIDER Rocket - for gluing or flush-mounting - with black aluminum ring and tinted glass. Approved for rear use.

In the center, six bright ultra LEDs, the outer ring is made of COB (Chip On Board) chips. Supplied with a black anodized aluminum ring.

This provides higher luminosity than conventional LEDs.

HIGHSIDER taillights and taillights/turn signals give you the safety you need and the look you want - whether for a cruiser, motorcycle or scooter.

Dimensions

• A1: 18 mm


• A2: 15 mm


• D1: 45 mm


• D2: 43 mm


• Mounting bolt: M8 x 1.25 mm


• length: 18 mm

Connections :

• Black cable = ground (-)


• Yellow cable = tail light (+)


• Red cable = brake light (+)

Contains: 1 piece

Tip:
Can be installed flat without the aluminum ring, so that only the lens is visible. To do this, a 40 mm-wide hole must be drilled. Alternatively, the combination can be mounted with the aluminum ring, e.g. on a support plate on the vehicle.