RFX Motorcycle crown Honda Pro Series 420

The RFX Pro Series Armalite sprockets are designed and tested at the highest level by racing teams in world and British championships.

The dual-sprocket design offers optimal performance, reduced weight thanks to a 7075-T6 aluminium core, and longer tooth life due to the high carbon density special steel outer.

The Armalite sprockets also feature a hexagonal interface between the inner and outer ring, a revolutionary technology for sprockets that maximises the transmission between the two parts and completely eliminates the force exerted on the rivets.

Features:

• CNC 7075 aluminium inner ring
• HCS outer ring
• Hex-Drive location between the inner and outer ring
• CAD-designed profile for lighter weight.
• New mud release groove style to reduce wear.
• The rigid design increases torsional strength.
• Anodised colour

Installation instructions:

• Start by placing the bike on a stand, with the rear wheel off the ground.
• Remove the chain and wheel from the bike.
• While holding the hex key, loosen the nuts using a wrench.
• Remove all nuts and the worn sprocket.
• Clean the area around the hub, ensuring it is clean and free of debris.
• Take the new sprocket and place it on the hub, ensuring it fits properly and the bolt holes are correctly positioned.
• Clean the bolts and nuts for the sprocket.
• Apply blue Loctite to each bolt and insert them into the holes.
• Hand-tighten the nuts onto the bolts, ensuring the seals are intact and in good condition.
• Hold the hex key in place and evenly tighten the nuts.
• Tighten the nuts and bolts according to the user manual.
• Reinstall the wheel onto the bike, ensuring the chain is properly aligned and tightened according to the manufacturer's specifications.