RFX Motorcycle circuit breaker Kawasaki Race Series KX 250 F (KX250N)

The RFX Race Series cut-off switches are OEM replacement parts.

Complete with the same connections, fittings, connectors, and cable lengths as the original part.

Available for a wide variety of bikes.

Features:

• OEM replacement
• Accepts all original connectors
• OEM cable length

Installation instructions:

• Start by removing the front plate.
• Carefully cut the cable ties that hold the start and stop switch wires on the handlebar, then unscrew the clamps and let them hang.
• Locate the switch connector on the bike; it is often near the steering column on the chassis but may sometimes be under the tank.
• Detach the connector and remove the switch, noting the wiring path.
• Clean the connector with electrical contact cleaner.
• Lightly attach the new switch to the handlebar in the desired position.
• Route the wires as you did for the old switch and assemble the connector.
• Ensure that the wires are not tight by turning the handlebar fully, adjust if necessary.
• Reinstall the cable ties if possible, positioning the wires at the back of the handlebar to avoid damage from debris.
• Reattach your front plate.

Specifications:

• weight (g): 300
• width (mm): 90
• height (mm): 25
• length (mm): 150
• volume (cm³): 338