RFX Motorcycle circuit breaker Suzuki Race Series RM 80 STD WHEELS 17/14

The RFX Race Series cut-off switches are OEM replacement parts.

Complete with the same fittings, fixings, connectors, and cable lengths as the original part.

Available for a wide variety of bikes.

Features:

• OEM replacement
• Accepts all original connectors
• OEM cable length

Installation instructions:

• Start by removing the front panel.
• Carefully cut the cable ties holding the start and stop switch cables on the handlebar, then unscrew the clips and let them hang.
• Locate the switch connector on the bike, it's usually near the steering head on the frame but can sometimes be found under the tank.
• Detach the connector and remove the switch noting the routing of the wiring.
• Clean the connector with electrical contact cleaner.
• Gently attach the new switch to the handlebar in the desired position.
• Route the wires as for the old switch and connect the connector.
• Check that the wires are not taut by turning the handlebar fully, adjust if necessary.
• Reinstall the cable ties if possible, positioning the cables behind the handlebar to avoid damage from debris.
• Replace your front panel.

Specifications:

• weight (g): 50
• width (mm): 100
• height (mm): 30
• length (mm): 150
• volume (cm³): 450