RFX Switch Universelle Race

The switches from the RFX Race series are exact OEM replacement parts. Complete with the same fittings, fasteners, connectors, and cable lengths as the original part. Available for a wide range of motorcycles.

Features:

• OEM replacement
• Accepts all original connectors
• OEM cable length

Fitting instructions:

• Start by removing the front number plate.
• Carefully cut the cable ties holding the start and stop button cables to the handlebars, then unscrew the clamps and let them hang.
• Locate the switch connector on the motorcycle; these are often near the chassis pivot but can sometimes be under the tank.
• Unplug the connector and remove the switch, noting the wiring path.
• Clean the connector using a contact cleaner such as Maxima Electrical Contact Cleaner.
• Lightly attach the new switch to the handlebars in the desired position.
• Route the wires as for the old switch and clip the connector together.
• Check the entire length of the wires by turning the handlebars fully and ensuring that the wires are not taut; adjust if necessary.
• Reattach the cable ties if possible, positioning the cables behind the handlebars to avoid damage from debris.
• Replace your number plate.