RFX Motorcycle cable lubricator Race

The RFX Race Series tools are a selection of high-quality tools that allow you to carry out all maintenance tasks on your off-road motorcycle. Made using only the best materials such as chrome vanadium and other high-strength steels, the RFX Race Series tools are suitable for both amateur and professional mechanics.

• Seal around the inner cable and outer sleeve.
• Fits a wide range of cable sizes.
• Allows lubricant to be injected into the cables.
• Accepts a wide variety of nozzle types.
• Once the lubricant flows freely from the other end, the cable is lubricated.

Usage Instructions:

• Slide the rubber cap down and loosen the cable adjustments to free the cable.
• Disassemble the throttle housing or clutch lever mount and remove the cable.
• Take the cable out of its lower position, whether on the carburetor, throttle body, or clutch arm.
• Open the cable greaser and place it on the inner sleeve.
• Slide the outer sleeve of the cable into the cable greaser and tighten the large screw on top.
• Using a lubricant spray, insert the nozzle (use an extension if necessary) into the cable greaser and spray.
• Spray until the lubricant flows freely from the lower end of the cable.
• Reposition the cable by reversing the steps of its removal.
• Once installed, check and adjust the cable play, ensuring to turn the handlebars on each side to their maximum position.

Specifications:

• weight (g): 49
• width (mm): 93
• height (mm): 35
• length (mm): 133
• volume (cm³): 433