Fristads High visibility work coverall class 3 8175 ATHS

High-visibility Multinorm coverall made from comfortable and durable material. Well-equipped class 3 coverall with inherent flame protection, suitable for ATEX environments with no metal details. Approved for industrial laundering.

Technical details:

• Anti-soiling, oil-repellent and water-repellent
• Reflective details on shoulders
• Button placket with zipper all the way up to the collar and hidden snap button closure
• 2 chest pockets with flaps and hidden snap button closure, 1 with internal D-ring and pen loop
• 1 chest pocket with zipper
• 2 front pockets
• 2 rear thigh pockets with flaps and Velcro closure
• Hammer loop
• 1 pocket for folding rule with flap and hidden snap button closure, button and ring for work knife
• 1 thigh pocket with flap and hidden snap button closure, mobile phone pocket with flap and Velcro closure
• Reinforced CORDURA® knee pocket with inside opening
• Height adjustable knee protection in knee pocket
• Adjustable waistband and cuffs
• Conforms to the standards EN 61482-1-2 APC 1, EN 61482-1-1 ELIM: 9 cal/cm2 (see the table of arc flash protective clothing according to EN 61482-1-2 class 2 and open arc according to EN 61482-1-1), EN ISO 11612 A1 A2 B1 C1 E2 F1, EN ISO 11611 A1 class 1 (see the table of flame-resistant clothing and welding protective wear according to EN 11612 C2, E3, F2 and EN 11611 A1 class 2), EN 1149-5, EN 13034 Type PB [6], EN 14404 with knee pads 124292 and EN ISO 20471 class 2 in size XS and class 3 in sizes S-3XL / certified after 50 washes / Tested for industrial laundering according to ISO 15797. / OEKO-TEX® certified.

Colour: High visibility yellow/navy blue (F171)

Material: 45 % modacrylic, 35 % cotton, 18 % polyamide, 2 % antistatic fibre. Reinforcements: 79 % cotton (flame-resistant), 20 % polyamide, 1% antistatic fibres. Inherent flame protection.

Weight: 300 g/m².

Sizes: XS-3XL.