Highsider LED motorcycle headlight Reno 7

7-inch LED headlight RENO TYPE 1, shiny black metal housing with black insert, round, side mounting, E-approved

HIGHSIDER

7-inch LED headlight HIGHSIDER RENO TYPE 1 for side mounting

Innovative Power LED headlight with position light and clear round glass. The metal housing has a shiny black finish and an asymmetrical chrome insert - approved for right-hand traffic only - E-approved.

Our highlights - give your bike an unmatched style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a standout in any case!

• 
  
• Headlight dimensions: Housing diameter: 200 mm
  
• Insert diameter: 178 mm
  
• Depth: 160 mm
  
• Distance between fixing holes (centre to centre): 170 mm
  
• Distance between the fixing hole (centre) and the end of the housing: approximately 90 mm
  
• Mounting: on the side with M8 threaded bolts
  

Technical specifications

• 
  
• Power consumption at 12.5 volts DC:
  
• Dipped beam: only 1.9 amps (approximately 23.75 watts).
  
• 12 volts 1069 lumens
  
• Only the two inner elliptical inserts light up.
  
• High beam: only 1.4 amps (approximately 17.5 watts).
  
• 12 volts 1100 lumens
  

Only the outer LED ring lights up. All LEDs light up when the headlight high beam is activated.

Connections on the reflector inside the headlight housing:

• 
  
• black cable = ground (-)
  
• red cable = high beam (+)
  
• blue cable = dipped beam (+)
  

2 additional cables for position light: black = ground (-), red = position light (+)

Delivery contents: 1 piece with connector (plug) with a 210 mm cable, for H4 halogen bulbs, connections:

• 
  
• green cable = ground (-)
  
• blue cable = high beam (+)
  
• white cable = dipped beam (+)
  

Notes

Asymmetrical reflector - approved for right-hand traffic only

Optional replacement insert

, black: Ref. 226-011