GPR Tech Silencer for motorcycle New Evo Kawasaki Z 300 2014/2017 E3

GPR exhaust compatible with Kawasaki Z 300 2014-2017, New Grand Prix Evo Titanium, legal exhaust, approved, silencer with removable db killer and specific link pipe.
No structural modifications to the motorcycle are required for installation in order to use the product in an approved version. It is recommended to read the instructions in the package or watch the tutorials available on YouTube.
For online purchases, it is necessary to activate the warranty by sending the appropriate stamped coupon from the installation workshop via email; for physical purchases, the shop's stamp is sufficient. The exhaust features a removable db killer (noise limiter) for track use; removing the db killer is not ONLY illegal, but the customer assumes responsibility for using the motorcycle on track only, without saddlebag, flashlight, and license plate holder or any other parts that would conflict with the altered throttle angle due to the transformation into a racing version. Misuse of this situation on the road will result in loss of product warranty. Starting from the purchase, there is a right to repair with return to the GPR factory or the nearest official distributor at the customer's expense.
GPR cannot provide a new silencer instead of the one to be repaired; the customer must agree to reinstall the original exhaust or wait the standard time for repair.
The new Grand Prix Evo Titanium silencer from GPR was created to celebrate its 20 years of presence in the MotoGP/Moto2/Moto3 world championship. The Grand Prix line was first presented in 2005, coinciding with the debut of the Konica Minolta team and rider Makoto Tamada, as well as the LCR team and rider Casey Stoner. The silencer is conical, with a special shape ranging from a diameter of 90 mm to 130 mm in circumference and variable length depending on the motorcycle. It is equipped with a natural colour titanium sleeve, a CNC-machined black end cap with a pentagonal outlet, and a silencer.

FEATURES

• SOUND: Enhanced sound compared to the original exhaust.

• PERFORMANCE: Improved performance compared to the original exhaust.

• QUALITY: Italian craftsmanship with high-quality welds.

• WEIGHT: Lighter than the original exhaust.
Joint and mounting accessories: this kit includes the specific joint and/or the half-collector and the corresponding kit of supports and accessories, allowing for installation without structural modifications.
Original GPR product, developed through extensive experience in the World Championship of Motorcycles, offers an innovative design, increased performance, significant weight reduction, and improved sound of the motorcycle.
2 years international warranty.
Removable db killers? Altering the db killer welds or anti-tamper screws or removing the fitting is illegal for road use and non-compliant with EU directives; this is only possible for RACING use on track, and using the open version on the road is not compliant with road traffic regulations.
You can use the kit for the official annual inspection.
Mounting recommendations: GPR products are plug and play, but it is still recommended to install the products in a professional workshop; no claims will be accepted in case of incorrect installations.
The specific homologation certificate is provided, along with the installation instructions; each silencer carries the homologation code. In case of problems encountered during installation, it is mandatory to stop and suspend activity, and immediately seek information and/or advice from customer service.